How do I select or change my primary organization after registering?

Do you need to change the organization you are registered with? You can do this at any time, but you need to be aware of two things first: Your registration must be accepted by the membership approver of the new organization, and it may take a while, depending on how responsive they are. If your registration is approved, you will receive a new registration code that must be entered into Paratext to continue to have full functionality. Request Membership of an Organization Here is how to request membership of an organization for those with an existing registration. Go to https://registry.paratext.org and log in using the email account that you registered with. Click on your name at the top-right of the page: Click your name then my profile Click My Profile. Scroll down to Primary Organisation. Click Request membership of an organisation: Request membership of an organization Search for and select your organization: Search for and select organization Click the Request button. If you are not part of any organization listed, you may Request to be an Independent Translator Change Membership to a Different Organization If you see “Requested membership of [name of organization]”, this means your request is in process. Mmembership requested If it has taken too long, or you requested membership of the wrong organization, you may make another request as follows: Go to https://registry.paratext.org/orgs Search for your correct organization’s name and find it in the list below: Search for and find organization Do NOT click the View button. Instead click the down arrow next to the View button: request membership to organization Click Request Membership. Request to be an Independent Translator (no Organization) If you are not with an organization but are involved in a Bible translation project that follows the FOBAI Translation Standards, you may Request to be approved as an independent translator.

System requirements for Paratext 9

Windows Windows 8 or later with 8GB of RAM. (Paratext will run with 4GB RAM or even less, but it would be better not to run other programs at the same time.) Paratext 9.1 will probably not work on Windows 10 for ARM devices, like the Surface Pro X. Linux Paratext 9 can be installed in an Ubuntu or Wasta Linux LTS (long-term support) version. For info, see packages.sil.org

How do I find my Paratext Registration Code?

Find Your Existing Registration Code You can copy/paste your existing code from Paratext: Paratext 9: Go to the Paratext menu > Help > Registration Information. Paratext 8: Go to Tools > Registration Information. Your Registration Code should look similar to this: W9GYM2-CUK4ET-7RPVGV-JWEPG6-WBTE8P: paratext registration code You could also search for an email with your Registration Code: From: admin [at] paratext.org Subject: “Your registration code for Paratext” Reset your Registration Code If you cannot find your registration code, you can reset it with these instructions: I lost my registration code.

How do I change the name of my project?

Paratext projects have two names (see Project menu > Project Settings > Project Properties): Full Name: For example, “Hawaiian Pidgin Translation Project” (1) Short Name: For example, “hwc21” (2) It is very simple to change a project’s Full Name, but more complicated/involved to change a project’s Short Name. Instructions to make these changes are below. Change a Project’s Full Name Only a Project Administrator can change a project’s Full Name. To change a project’s Full Name, follow these instructions: Click on the Project’s menu: Go to Project > Project Settings > Project Properties… Click Manage Registration: On the Paratext Registry website: Change the Project Full Name: Scroll down and click the Save Changes button. Go back to Paratext. Verify the Full Name has changed: Click OK. Change a Project’s Short Name Only a Project Administrator can change a project’s Short Name. To change a project’s Short Name, follow these instructions: Using the Convert Project Tool.

Can text resources be installed offline?

Yes. To obtain resource files for offline installation, you will need to copy them from a computer that has already downloaded them in Paratext. Please follow the instructions below. Instructions Source Computer (Online) First, on the source computer, you must download/update the Resources that you want to install: Paratext 9: Go to the Paratext menu > Download/Install Resources… Paratext 8: Go to File > Download/Install Resources… Choose Internet (or Folder if you have them locally already). Select the Resources that you want to copy/update for the offline installation. Click Download/Install. Wait for the Download/Install to finish. Go to My Paratext 8 Projects\_Resources directory. Newer installs: My Paratext 9 Projects\_Resources. Copy all the files in that directory to a USB drive. Target Computer (Offline) Put the USB drive in the target computer. Paratext 9: Go to the Paratext Menu > Download/Install Resources… Paratext 8: Go to File > Download/Install Resources… Choose Folder. Navigate to the USB drive. Select the Resources you want to install. Click Download/Install. Note that the copied resources will ONLY be accessible if the receiving user is registered with an organization that is licensed to use them.

Can I add additional resources to Paratext?

Yes. To add a text as a Paratext resource, the text must first be uploaded to the Digital Bible Library after passing required checks in Paratext. Once in the DBL, the owner may choose to license it to specific organizations, to all vetted Paratext users, or to every Paratext user. If you are the rightsholder of a text you wish to add, you may work with the DBL curator in your organization to upload the text and make it available. If you wish to request the addition of someone else’s text as a resource, you should contact the rights-holder and refer them to the text resources page to explain how we will use the resource:

Is Paratext compatible with Windows 7?

On January 14th, 2020 Microsoft ended support for Windows 7. Paratext may still run on Windows 7, but it is no longer officially supported. Some people have had difficulty installing Paratext 9 on Windows 7, and it is likely that future versions of Paratext will not run on Windows 7. We no longer test our software on Windows 7, and if you need support, we may ask you to move to Windows 10. Also, please be aware that you are more vulnerable to being hacked if you are using Windows 7 because it will not receive security updates when vulnerabilities are discovered. This is especially important if you work in a sensitive location. Microsoft discusses this in their end-of-support announcement: After January 14, 2020, PCs running Windows 7 no longer receive security updates. Therefore, it’s important that you upgrade to a modern operating system such as Windows 10, which can provide the latest security updates to help keep you and your data safer. In addition, Microsoft customer service is no longer available to provide Windows 7 technical support. Related services for Windows 7 are also also being discontinued over time … If you continue to use Windows 7 after support has ended, your PC will still work, but it will be more vulnerable to security risks and viruses. Your PC will continue to start and run, but will no longer receive software updates, including security updates, from Microsoft.

What is new in Paratext 9?

A lot of the functionality in Paratext 9 is the same, but there have been significant changes to the menus, how windows work and how to open things. Paratext 9 also includes Enhanced Resources, texts with information about the underlying Greek or Hebrew words. Menus An awkwardness of using Paratext since it began is how the menus change or apply depending on what your active project is. How often have you gone looking for a command, or realized you just ran a check or tool on the wrong project because you forgot what you’d last clicked in? In Paratext 9, this confusion is minimized because the menu commands applying to specific projects are launched from that project window. Menus for global Paratext functions are launched from the top left icon. Menus are not displayed when not needed, giving you more room for text. Windows Arranging windows of different projects or components was either a tedious manual process, or a fully automatic one if you used a stacked arrangement. In Paratext 9, it is easier to arrange windows than in the manual process of earlier versions, while you can adjust your arrangement to make one window larger and another smaller, which was impossible in a stacked arrangement. Open Rather than several different menu commands for opening different things, like a special command to open Biblical Term renderings, another for dictionaries, another for Notes lists, in Paratext 9 all of these things can be opened from the same Open dialog. Enhanced resources Paratext 9 has new enhanced Scripture resources which have been tagged with information about the Greek and Hebrew words found in the source text. This allows lookups to be performed for lexical entries, images, and maps pertaining to the source language text. These resources are being translated into many languages of wider communication. Existing Paratext 8 resource texts are also available in Paratext 9. The comprehensive list of new features is found here.

Do I need to migrate my project from Paratext 8 to Paratext 9?

No. Paratext 8 and Paratext 9 share the same data structure, so projects won’t require migration from Paratext 8 to Paratext 9. Members working on a shared project can use Paratext 8 or Paratext 9 and share changes with each other.

How are resources accessed in Paratext?

Text resources are downloaded directly into Paratext from the menu. (In Paratext 8, this is File > Download/Install Resources. In Paratext 9 Download/Install resources is in the Paratext menu). Resources come from the Digital Bible Library where they are licenced for use by Bible Translators.

What resources are available?

The resources available to you will vary based on the group you belong to: Paratext User, Qualified Translator, or Qualified Translator in an Approved Organisation. Resources are available based on the licence the rights-holder has assigned to the resource in the Digital Bible Library. There are currently over 1,600 texts in the Digital Bible Library, although not all of them will be licensed for distribution in Paratext. Any DBL resource that is licensed for distribution in Paratext will be available to be installed in Paratext. Resources that have an open license will be available to all users. Other resources will only be licensed for use by projects with certain organizations. See Text Resources in Paratext

Do the different tiers of access to Paratext require different installers?

No. There is just one edition which can be used by all users. It is available as either an Online or Offline installer.

How do I know if I am using an alpha version, a beta, or a stable release version?

Paratext 9 version numbering works like Paratext 8 numbering – 9.0.x.y If x is between 1 and 49, it is an alpha. Alpha versions are for early adopters only and are usually not fully featured or fully functional. They should not be used with live project data. If x is Between 50 and 99 it is a beta. Beta versions are more functional, more feature-complete and stable than an alpha and may be appropriate to use with live projects. Sometimes a beta is offered as a “release candidate” to indicate it is a relatively stable beta version. Release candidates are the final beta versions before stable release versions. If x is 100 or over, it is a full stable release. For example, 9.0.100.1 or greater. The current version can be downloaded here: https://paratext.org/download/currentversion/

Are certain organizations or groups prevented from using Paratext?

The Paratext Board of Governors wishes to make Paratext available to all Bible translators with as few restrictions as possible. In the past, there were complaints about the difficulty of obtaining licenses for Paratext. The new registration system starting with Paratext 8 has been designed to decentralize the process of obtaining licenses. Now the approval process is managed by more than 250 organizations, each for their own personnel. Organizations and church groups are being added all the time by filling out a simple form found on this site’s registration information page. Here is how it works: Any organization may request to become a Paratext Organization. There are two criteria: They must agree to follow the standards for Bible translation set forth by the Forum of Bible Agencies International. This is a checkbox on the form. They must abide by the Paratext Terms of Use, in the section entitled Global Principles. Although this is not made explicit on the organization registration form, it is in the confirmation email that is sent when the registration is received. If any Bible translator does not have access to Paratext and its excellent set of resources for translators today, it is probably because they have not registered their organization. In the rare case that a request is rejected, it is most often because the group is not involved in Bible translation. The only other cases of rejection are where they claim not to comply with FOBAI translation standards or have violated the Paratext Terms of Use in some way.

How can I change my Paratext user name?

Go to https://registry.paratext.org Log in to the site with your email address Click on your username at the top right and select “My Profile” Click on “Change…” next to your Registration name. Enter the corrected name Your new name will be effective immediately and you will receive a new registration code by email. Enter the new name and code into Paratext 8 under Tools > Registration Information. For a more complete explanation of the implications of changing your name, please see this complete article: Change a user’s Registration Name

Why isn’t the registry website working in my web browser?

If you are using an older web browser, pages on the Registry website may fail to load. If you see a “Browser Unsupported” message, you’ll need to install or upgrade to a modern web browser instead. We recommend using the latest version of Google Chrome or Mozilla Firefox. The following browser versions (and older) are known to be problematic: Chrome 27, Firefox 25, Safari 6, Internet Explorer 10.

How do I fix corrupt or invalid resources (like BYZ or HEB) in Paratext 9.1?

Some users have been getting an error message that BYZ, HEB, and/or other resources are corrupt: Only BYZ is Corrupt (Quick Fix) Please follow these instructions if only BYZ is corrupt: Make sure Paratext is closed. Go to the My Paratext 8 Projects/_Resources directory Newer installs: My Paratext 9 Projects/_Resources. Remove the BYZ.p8z file. Download the new BYZ.p8z file from here: https://paratext.org/files/resources/BYZ.p8z. Copy the new BYZ.p8z file to your _Resources directory. Open Paratext and verify BYZ appears correctly in Paratext. Delete the old resource file. Multiple Corrupt Files Please follow these instructions to fix multiple corrupted files: Download the Paratext 9.1 installer if you have not already: https://paratext.org/download Save your current layout (if necessary): Paratext menu > Layout > Save current layout. Note: Uninstalling may cause Paratext to forget which windows were open. Make sure Paratext is closed. Go to the My Paratext 8 Projects/_Resources directory Newer installs: My Paratext 9 Projects/_Resources. Remove the files for the Source Language resources that are corrupt (for example: BYZ.p8z, HEB.p8z, GRK.p8z) Suggestion: move them to the Desktop. Uninstall Paratext 9.1. Choose Keep Settings. Note: Uninstalling will NOT remove any Project data. Run the Paratext 9.1 installer. Download and update to the latest Paratext 9.1 patch from https://paratext.org/download For example: Patch 9 1 104 39 Verify that that corresponding resources (for example: BYZ.p8z, HEB.p8z, or GRK.p8z) were restored to the _Resources directory. Open Paratext and verify they appear correctly in Paratext. Delete the old resource files.

What is new in patch 9.1.104.59?

Changes in patch 9.1.104.59 (since 9.1.104.39) Exception: Paratext System.NullReferenceException ChangeListForm.cs:157 https://paratext.myjetbrains.com/youtrack/issue/PTXE-55626 Exception: Paratext System.OverflowException CustomWindowTitleBar.cs:499 https://paratext.myjetbrains.com/youtrack/issue/PTXE-51927 Exception: Paratext System.ArgumentOutOfRangeException MegaMenu.cs:881 https://paratext.myjetbrains.com/youtrack/issue/PTXE-55787 Saved layout dialog refers to an obsolete menu category https://paratext.myjetbrains.com/youtrack/issue/PTX-20883 RegexPal does not open showing the text of the selected project. https://paratext.myjetbrains.com/youtrack/issue/PTX-20828 Exception: Biblical Terms tool throws restore memento exception at wrong time https://paratext.myjetbrains.com/youtrack/issue/PTX-20799 The line separating the scripture text area and foot pane seems invisible https://paratext.myjetbrains.com/youtrack/issue/PTX-20588 Exception: Hyphenation data being modified while loading https://paratext.myjetbrains.com/youtrack/issue/PTX-20888 PtxUtils.Progress.ProgressCancelledException TextLoader.cs:0 https://paratext.myjetbrains.com/youtrack/issue/PTXE-55804 Exception: Paratext System.NullReferenceException ScriptureLinksHelper.cs:52 https://paratext.myjetbrains.com/youtrack/issue/PTXE-53095 Notes List Window keyboard shortcuts not functioning https://paratext.myjetbrains.com/youtrack/issue/PTX-20832 Tools opened from project windows should inherit the Scripture navigation history from the project window’s scroll group https://paratext.myjetbrains.com/youtrack/issue/PTX-20814 Exception: Paratext System.ArgumentOutOfRangeException DictionaryTab.cs:233 https://paratext.myjetbrains.com/youtrack/issue/PTXE-56090 Typing does not appear in main window after using A&P https://paratext.myjetbrains.com/youtrack/issue/PTX-20858 Exception: Paratext System.ObjectDisposedException MegaMenu.cs:561 https://paratext.myjetbrains.com/youtrack/issue/PTXE-56249 Exception: Paratext System.NullReferenceException PlanVersionUpdater.cs:56 https://paratext.myjetbrains.com/youtrack/issue/PTXE-55574 Exception: Paratext System.InvalidOperationException OccurrencesFilters.cs:626 https://paratext.myjetbrains.com/youtrack/issue/PTXE-56365 Show only latest org project plans for most users. Allow org admins to also show org plans in development. https://paratext.myjetbrains.com/youtrack/issue/PTX-20929 Exception: Paratext System.NullReferenceException BiblicalTermsForm.cs:515 https://paratext.myjetbrains.com/youtrack/issue/PTXE-56488 Exception: Paratext System.ArgumentException ProgressInfo.cs:701 https://paratext.myjetbrains.com/youtrack/issue/PTXE-54922 Paratext Live exception with Translation Priority filter https://paratext.myjetbrains.com/youtrack/issue/PTXS-28816 Exception: Error while processing chapter verse check when verse is missing https://paratext.myjetbrains.com/youtrack/issue/PTX-20934 Paratext not shutting down properly https://paratext.myjetbrains.com/youtrack/issue/PTXS-28854 BCV is disabled in new floating window opened from another FloatWindow by right click. https://paratext.myjetbrains.com/youtrack/issue/PTX-20881 Target Invalid message (remove\ipr from the check for references) https://paratext.myjetbrains.com/youtrack/issue/PTX-20105

How do I fix corrupt or invalid resources (like BYZ or HEB) in Paratext 9.1?

Some users have been getting an error message that BYZ, HEB, and/or other resources are corrupt: Only BYZ is Corrupt (Quick Fix) Please follow these instructions if only BYZ is corrupt: Make sure Paratext is closed. Go to the My Paratext 8 Projects/_Resources directory Newer installs: My Paratext 9 Projects/_Resources. Remove the BYZ.p8z file. Download the new BYZ.p8z file from here: https://paratext.org/files/resources/BYZ.p8z. Copy the new BYZ.p8z file to your _Resources directory. Open Paratext and verify BYZ appears correctly in Paratext. Delete the old resource file. Multiple Corrupt Files Please follow these instructions to fix multiple corrupted files: Download the Paratext 9.1 installer if you have not already: https://paratext.org/download Save your current layout (if necessary): Paratext menu > Layout > Save current layout. Note: Uninstalling may cause Paratext to forget which windows were open. Make sure Paratext is closed. Go to the My Paratext 8 Projects/_Resources directory Newer installs: My Paratext 9 Projects/_Resources. Remove the files for the Source Language resources that are corrupt (for example: BYZ.p8z, HEB.p8z, GRK.p8z) Suggestion: move them to the Desktop. Uninstall Paratext 9.1. Choose Keep Settings. Note: Uninstalling will NOT remove any Project data. Run the Paratext 9.1 installer. Download and update to the latest Paratext 9.1 patch from https://paratext.org/download For example: Patch 9 1 104 39 Verify that that corresponding resources (for example: BYZ.p8z, HEB.p8z, or GRK.p8z) were restored to the _Resources directory. Open Paratext and verify they appear correctly in Paratext. Delete the old resource files.

System requirements for Paratext 9

Windows Windows 8 or later with 8GB of RAM. (Paratext will run with 4GB RAM or even less, but it would be better not to run other programs at the same time.) Paratext 9.1 will probably not work on Windows 10 for ARM devices, like the Surface Pro X. Linux Paratext 9 can be installed in an Ubuntu or Wasta Linux LTS (long-term support) version. For info, see packages.sil.org

Can I still use Paratext 8 after installing version 9?

Yes. Installing Paratext 9 does not remove Paratext 8 from your computer. The two versions use the same project folder, and there is no need to migrate projects like there was when moving from Paratext 7 to Paratext 8. Team members can share projects together even while some are on Paratext 8 and some on Paratext 9. We would advise caution in opening both versions at the same time. Both versions read and write the same files in each project. If you make changes in one version, then changes in the same project in the other version, some of your changes might not be saved. You will get a warning message if you open one while the other is already open. We would advise you to heed the warning and close one before you open the other. If after installing Paratext 9 you wish to remove Paratext 8, you can uninstall it from the Windows Settings App, (the gear in the start menu > Apps > find Paratext 8 in the list and click Uninstall) or from the Control Panel. (Programs and Features > Find Paratext 8 in the list, right click and choose Uninstall).

I am registered for Paratext 8. Must I register again for Paratext 9?

No. Your Paratext 8 registration will work in Paratext 9. When you install Paratext 9, it will detect your registration info if Paratext 8 is installed on your computer.

Do I need to register in order to download Paratext?

No. You can download and install Paratext at any time, but you must register in order to use it. Registration is free to everyone.

What is new in Paratext 9?

A lot of the functionality in Paratext 9 is the same, but there have been significant changes to the menus, how windows work and how to open things. Paratext 9 also includes Enhanced Resources, texts with information about the underlying Greek or Hebrew words. Menus An awkwardness of using Paratext since it began is how the menus change or apply depending on what your active project is. How often have you gone looking for a command, or realized you just ran a check or tool on the wrong project because you forgot what you’d last clicked in? In Paratext 9, this confusion is minimized because the menu commands applying to specific projects are launched from that project window. Menus for global Paratext functions are launched from the top left icon. Menus are not displayed when not needed, giving you more room for text. Windows Arranging windows of different projects or components was either a tedious manual process, or a fully automatic one if you used a stacked arrangement. In Paratext 9, it is easier to arrange windows than in the manual process of earlier versions, while you can adjust your arrangement to make one window larger and another smaller, which was impossible in a stacked arrangement. Open Rather than several different menu commands for opening different things, like a special command to open Biblical Term renderings, another for dictionaries, another for Notes lists, in Paratext 9 all of these things can be opened from the same Open dialog. Enhanced resources Paratext 9 has new enhanced Scripture resources which have been tagged with information about the Greek and Hebrew words found in the source text. This allows lookups to be performed for lexical entries, images, and maps pertaining to the source language text. These resources are being translated into many languages of wider communication. Existing Paratext 8 resource texts are also available in Paratext 9. The comprehensive list of new features is found here.

Do I need to migrate my project from Paratext 8 to Paratext 9?

No. Paratext 8 and Paratext 9 share the same data structure, so projects won’t require migration from Paratext 8 to Paratext 9. Members working on a shared project can use Paratext 8 or Paratext 9 and share changes with each other.

How are resources accessed in Paratext?

Text resources are downloaded directly into Paratext from the menu. (In Paratext 8, this is File > Download/Install Resources. In Paratext 9 Download/Install resources is in the Paratext menu). Resources come from the Digital Bible Library where they are licenced for use by Bible Translators.

How do I know if I am using an alpha version, a beta, or a stable release version?

Paratext 9 version numbering works like Paratext 8 numbering – 9.0.x.y If x is between 1 and 49, it is an alpha. Alpha versions are for early adopters only and are usually not fully featured or fully functional. They should not be used with live project data. If x is Between 50 and 99 it is a beta. Beta versions are more functional, more feature-complete and stable than an alpha and may be appropriate to use with live projects. Sometimes a beta is offered as a “release candidate” to indicate it is a relatively stable beta version. Release candidates are the final beta versions before stable release versions. If x is 100 or over, it is a full stable release. For example, 9.0.100.1 or greater. The current version can be downloaded here: https://paratext.org/download/currentversion/

Yes, anyone can download, install, and use Paratext, but registration is mandatory. For people who are not vetted as having a role in Bible translation there are limitations, explained on the registration page of this site

Is Paratext 9 compatible with Publishing Assistant?

Yes, Paratext 9 projects can be accessed by Publishing Assistant. For more information on Publishing Assistant go to https://pubassist.paratext.org/

What if I am involved in multiple projects as consultant or administrator?

Since Paratext 8 and Paratext 9 can run on the same computer, and Paratext 8 users and Paratext 9 users can work together in the same shared project. We would encourage consultants to upgrade to the new version, but if you stay on 8, you will be able to continue consulting with teams who are using Paratext 9. In the same way, you can continue to consult for a team using 8 after you upgrade to 9.

Must everyone on the team update to Paratext 9 at the same time?

No. It is possible for Paratext 8 users and Paratext 9 users to work on the same project. There are a few minor issues if this is the case. See this FAQ for details

Can users of Paratext 8 and Paratext 9 share via send/receive?

Yes. There is no need to migrate projects from Paratext 8 to Paratext 9. However, there may be a few small inconveniences when working with a shared project in both versions. If the project includes figures, the markers for these may appear different in Paratext 9 than in Paratext 8, and it may be hard to edit figures in both versions. If the project uses Ruby glossing (a special need for Japanese language texts), these glosses may not be visible for Paratext 8 users. When creating a new project in Paratext 9, you can create it using USFM3 or USFM2. Paratext 8 does not fully support USFM 3 but it will open such projects. Certain project plans may only be applied and edited in version 9. However, the progress is shared between both 8 and 9.

How soon must I upgrade to Paratext 9?

There is no impending deadline to upgrade to Paratext 9. Since both versions work on the same data, some of your team may want to wait to upgrade. We would encourage those who can to upgrade as soon as possible. Then you will be able to help others learn the new interface when they upgrade later.

How do I change my email in the registry?

You can add a second email address to your profile, this is relatively simple. Log in to the registry, click your name at the top right and go to Profile. Click Add email Address to add a second email. But if you want to change the email you use to login to the registry, this takes several steps. The steps depend on whether you were using Google to authenticate your existing address or not. It would be good to go through this process before you close your first email account. Using Google authentication Log onto https://registry.paratext.org. Click your name at the top right. Now click Settings. At the top you will see identities. You should see your existing email address listed with the Google logo. If your new email is also based on Google, click “Change”. Your browser will bring up the list of Google accounts it knows about, you pick the one you want. If the one you want is not in the list, click “Use another account”. If Google asks you to login to the other account, or to give permission for registry.paratext.org to access your info, click Yes. When this is finished, you should now see your new address in the Google section of Identities, and you can now start using your new email to login to the registry. If your new email is not based on Google, click “Unlink” in the identity line. It will ask you to enter your new address, then send a link to the new email. Go to your Inbox and click the link. Now the registry will ask for a login password. This does not have to be the same as your email password. When you set the password you should be able to login using your new email and your new password. Not using Google authentication Log onto https://registry.paratext.org. Click your name at the top right. Now click Profile. Click Add New Email and put in your new email address. The registry will send an email with a link you must click to verify your email. Go to your email and click on the link in the message. Now, when you come back to the Registry, you can click on your name, go to Profile, and each email address on your profile should have a trash can by it. Click the trash can by your first email to discard it. The password you set up to login to the registry is not changed when you change your email. You can log on to the registry using the new email and your existing password. If you want to change your password for the Paratext registry, click on your name at top right and go to Settings. There is a section called Password where you can change your password. If your new email is based on Google, you can use the Google authentication method if you wish, where you login to your Google account in the browser, and Google tells the Paratext registry that you are you. Click the link for the Google authentication method in the Password section of Settings. Google will ask if you give permission for registry.paratext.org to access some of your account information, and if you grant access, you can then use the Google authentication to login to the registry. If you no longer have access to your first email You still may be able to login to the registry if you were not using Google authentication. You can enter your old email and the password you set up for the registry, then proceed to change your email. If you used Google authentication, or if you have forgotten your registry password, you will have to have help to get your new email address into the system. Contact your Paratext supporter, or submit a request for help in Paratext (Give Feedback in Paratext 9, Submit a problem in Paratext 8). Final step: for all users After changing your email in the registry, you need to enter your new email in Paratext. The registration information dialog, along with your user name and registration code saves your email. To change this, go to registration information (under Help in the top level menu; in Paratext 8 under Tools > Registration Information), and put your new email in the email box. Paratext sends this information to the Paratext team whenever you send feedback such as a problem report or suggestion, and using an old email address would mean the Paratext team has difficulties contacting you with suggestions or advice.

How do I select or change my primary organization after registering?

Do you need to change the organization you are registered with? You can do this at any time, but you need to be aware of two things first: Your registration must be accepted by the membership approver of the new organization, and it may take a while, depending on how responsive they are. If your registration is approved, you will receive a new registration code that must be entered into Paratext to continue to have full functionality. Request Membership of an Organization Here is how to request membership of an organization for those with an existing registration. Go to https://registry.paratext.org and log in using the email account that you registered with. Click on your name at the top-right of the page: Click your name then my profile Click My Profile. Scroll down to Primary Organisation. Click Request membership of an organisation: Request membership of an organization Search for and select your organization: Search for and select organization Click the Request button. If you are not part of any organization listed, you may Request to be an Independent Translator Change Membership to a Different Organization If you see “Requested membership of [name of organization]”, this means your request is in process. Mmembership requested If it has taken too long, or you requested membership of the wrong organization, you may make another request as follows: Go to https://registry.paratext.org/orgs Search for your correct organization’s name and find it in the list below: Search for and find organization Do NOT click the View button. Instead click the down arrow next to the View button: request membership to organization Click Request Membership. Request to be an Independent Translator (no Organization) If you are not with an organization but are involved in a Bible translation project that follows the FOBAI Translation Standards, you may Request to be approved as an independent translator.

How do I find my Paratext Registration Code?

Find Your Existing Registration Code You can copy/paste your existing code from Paratext: Paratext 9: Go to the Paratext menu > Help > Registration Information. Paratext 8: Go to Tools > Registration Information. Your Registration Code should look similar to this: W9GYM2-CUK4ET-7RPVGV-JWEPG6-WBTE8P: paratext registration code You could also search for an email with your Registration Code: From: admin [at] paratext.org Subject: “Your registration code for Paratext” Reset your Registration Code If you cannot find your registration code, you can reset it with these instructions: I lost my registration code.

I lost my registration code. How do I get it?

Find your Existing Registration Code You can find your existing Registration Code by following these instructions: Find my Registration Code. Generate a New Code If your computer dies, is stolen, or you cannot find your code, you can generate a new code. Important Note: This will invalidate your current Registration Code and you will no longer be able to do Send/Receive. You will need to enter your new code for Send/Receive to work again. To generate a new code: Log in to registry.paratext.org Click on your name in the top right corner (1). Click Registration (2):Click your name srcset= Registration” width=”800″ height=”348″ /> Click the Generate button:Click Generate Click copy to copy the new code:Click Copy The new code will also be sent to you by email. Copy/Paste the new code into Paratext: Paratext 9: Go to the Paratext menu > Help > Registration Information. Paratext 8: Go to Tools > Registration Information. The new code will be linked to the same user and projects, so nothing needs to change at the project level. Just enter your new code in the Registration Information dialog, and you can resume working.

Do all projects have to be registered?

No. You can create an unregistered project with the functionality that is available on the Basic Tier of use. See the Registration page for details. You can change your mind later and register the project to gain full functionality.

How do I manage my Paratext notifications and email subscriptions?

You can manage your email subscriptions by going to https://registry.paratext.org. After you log on, click on your name at top right, and go to Settings. Under Notifications, you see which email address is subscribed to get notifications and Paratext News, or also to Help Improve Paratext. You can choose to change the email address these go to if you have more than one email address in your profile. (You can add another email address to your profile by clicking the Profile link). The notification daily digest refers to notifications from the registry, such as notifications of users being added or removed or user roles changing in projects you are a member of. The notification section also lets you select your preferred language for Paratext news items. If you no longer want to receive Paratext News or Help Improve Paratext, you can uncheck those boxes to unsubscribe. We do recommend that you stay subscribed to Paratext News, because these are infrequent emails about important developments in Paratext that we’d like you to know about. To change the language you receive notifications in, go to your profile and select the desired language in Preferred Language.

How can an independent translator get approval to use Paratext?

You need to contact the Paratext Board of Governors to be considered as an independent translator, explaining the nature of your project. You may use this form.

What email address should I use to sign into the Registry website?

The Paratext Registry will let you create a sign in with any valid email address, but if you then request a registration code as a member of a translation organization, your organization’s approver may expect you to be using your organizational email address, as this makes it easier to confirm your identity. It will also typically keep you from having to create and remember a password: if your organization’s email is on Google Apps, you will see a “G” icon next to your email address and can simply sign in via Google. If you are not a member of a translation organization, you can use any email address. If it is not a Google/Gmail address, you will be prompted to create a password. To change your email address once you have registered, see How do I change my email in the registry? Paratext 7 users: You do NOT need to use the same email address that you registered with in Paratext 7. Once you are signed in, just provide your existing Registration Name and Registration Code, and your existing identity will be linked to your new Paratext 8 registration. See also: How to register as a Paratext user.

Who can see information about confidential projects?

Members of a confidential project can see it in the registry, but it is not visible to other registry users, even in the same organization. It can be seen, however, by people in the project’s managing or contributing organizations that have a role of Administrator or Registration Reviewer in the registry. Supporters in those organizations do not have access to confidential projects unless the project is directly shared with them. In addition, there are two more roles that can see confidential projects: Root level administrators Those who administrate the registry can necessarily view these projects to resolve problems and make requested changes. Confidential project reviewers In order to prevent users from using confidential projects to circumvent the Paratext Terms of Use, a reviewer from SIL and one from UBS each perform the role of Confidential Project Reviewer. Their task is to ensure that confidential projects are not abusing copyright, or bypassing restrictions to use publishing tier tools. Lastly, progress.bible has access to confidential projects in order to report on progress, without revealing specifics at a project level. Individual members of projects are not listed in the data progress.Bible can access. The reporting that progress.Bible enables is set up so that only the organization(s) involved in a project can see detail, and the kinds of detail reported on also depend on the role the organization has in relation to a project. There is NO use of Paratext Registry data through progress.Bible that involves a public audience.

How do I register for Paratext?

Go to http://registry.paratext.org and log in with an email address, preferably a Google account from your organization. If you had a Paratext 7 registration, you can link that to your current registration by entering the Paratext 7 code. Users who are part of a Bible translation organization will have access to more resources and features. See the Registration section of this site for more details. If you are registered for Paratext 8, you do not need a new registration for Paratext 9.

How do I register a new project in Paratext?

When you create a New Project (from the main menu in Paratext 9 or the File menu in Paratext 8) you are given the option to register the project online. Project registration is only available to users who have been vetted by a Bible translation organization. Registered projects have additional features that are not available in Basic Tier projects as explained on the Registration page of this site. When registering a project, Paratext requires an active Internet connection. It forwards you to a browser and you must sign in with the account you registered for Paratext with. Once the registration entry is complete, Paratext links the Paratext project with the entry in the registry.

I am registered for Paratext 8. Must I register again for Paratext 9?

No. Your Paratext 8 registration will work in Paratext 9. When you install Paratext 9, it will detect your registration info if Paratext 8 is installed on your computer.

Do I need to register in order to download Paratext?

No. You can download and install Paratext at any time, but you must register in order to use it. Registration is free to everyone.

How can my organization get approval to use Paratext?

A representative of your organization needs to register for Paratext and then log in to the registry to fill out this form which will go to the Paratext Board of Governors for consideration.

Do the different tiers of access to Paratext require different installers?

No. There is just one edition which can be used by all users. It is available as either an Online or Offline installer.

Frequently Asked Questions

(FAQs)

Most Common Questions

All Questions

Click on a category name to view and expand the questions.

You may also use the search box in the menu bar above to search the whole site for answers.

What is new in Paratext 8?

A comprehensive list of changes since Paratext 7.5 can be found in the following post: What’s new in Paratext 8?

Frequently Asked Questions

(FAQs)

Most Common Questions

All Questions

What is new in Paratext 8?

Contact Us

Don't see your question here?

Was this helpful?

Paratext

News

Helpful Pages

About

Frequently Asked Questions

(FAQs)

Most Common Questions

All Questions

What is new in Paratext 8?

Contact Us

Don't see your question here?​

Was this helpful?

Paratext

News

Helpful Pages

About

Don't see your question here?